Your Personalized Power Portal

9310 Monroe St

Crown Point, IN , 46307

Search for another address

Average Bill

$237

Energy Usage

1,341 kWh

CO₂ Emissions

1,869 lbs

WattBuy Recommendations for Your Home

Toggle each recommendation on and off to see its impact on your bill, energy usage, and carbon emissions.

EV Chargers

Smart Thermostats

Estimated Savings

$25

CO₂ Emissions Reduced

16 lbs

Water Heaters

Demand Response

Estimated Savings

$24

CO₂ Emissions Reduced

187 lbs

Smart Plugs

Estimated Savings

$5

CO₂ Emissions Reduced

3 lbs

LED Lightbulbs

Estimated Savings

$10

CO₂ Emissions Reduced

7 lbs

Heat Pumps

Understand Your Current Energy Usage

Electricity Costs

Your bill is estimated to be $225.59 on the lower end (around April) and $250.18 on the higher end (around August). In your state of Indiana, the price that you pay for your electricity per kWh is 16¢. The cheapest rate can be found in North Dakota, at 11¢ per kWh. The most expensive rate is in Hawaii, at 40¢ per kWh.

Energy Sources

In your state of Indiana, the energy sources are 47% coal, 42% natural gas, 5% wind, and 5% solar. This means 89% of the energy comes from "dirty" sources. This contributes to the carbon footprint from your home’s electricity, which we estimate to be 22,428 lbs CO₂ a year. The average carbon footprint for a home in your state is 26,925 lbs.

Usage and Consumption

Your estimated monthly energy consumption is 1,341 kWh. The average for homes in your zipcode is 1,610 kWh. Several key factors contribute to your consumption. One is the age of your house—yours is 30 years old—since the older it is, the less efficient it tends to be. Size also matters, as bigger houses take longer to heat or cool. Your house is 16,092 square feet. The weather matters too because when temperatures are at their extremes, you use more energy.

Your Utility

Your electricity is provided by NIPSCO. To set up your account for a new move, to report an outage, or for any other questions, contact them using the information below.

Phone

1-800-464-7726

Website

nipsco.com

How We Crunch the Numbers

1
We estimate every home's electricity usage based on data from a number of public and private data sources, including your electricity distributor and the Department of Energy.
2
We overlay key information about where you live, including weather and climate data about your region, and housing data like when your home was built and how big it is.
3
To figure out your home's carbon footprint, we look at how electricity is generated in your state, like whether your electricity is coming more from coal (very carbon-intensive) or wind (carbon-free).

Using this data-driven approach, we have created a machine learning model that can estimate electricity usage and carbon footprint for every home in the US. We then use this information to recommend the best options for you, so you can feel good that WattBuy is recommending something truly personalized.

Our electricity estimations are trusted by our partners at The Department of Energy's National Renewable Energy Laboratory, as well as many of the biggest consumer brands in the world.